54mm Products
Now Certified!
54mm Hardware:
Typical 54mm motor system.
Internals: Venting bulkhead, U/C floating injector, injector nut/orifice, reusable nozzle, hardware.
Sky Ripper Systems offers for sale 54mm hardware in the following configurations:
- 54/550 motor: 23.9" long motor case with thrust ring and complete set of internals.
- 54/830 motor: 28.6" long motor case with thrust ring and complete set of internals.
- 54/1130 motor: 35.9" long motor case with thrust ring and complete set of internals
- 54mm System: All three motor tubes, three thrust rings, and one complete set of internals.
Replacement parts are also available for individual items.
 |
54mm reload kits are sold in packs of two. All six certified motor combinations use the same reload kit! |
1 |
Motor Case (550,830,1130cc) | 10 |
Pre-Heater Grain* |
2 |
Snap Ring (2) | 11 |
Fill Tube* |
3 |
Vented Bulkhead | 12 |
Igniter (not included) |
|
4 |
-223 O-ring (4)* | 13 |
Fuel Grain (3)* |
5 |
Injector Orifice Insert (2) | 14 |
Graphite Nozzle |
6 |
Compression Nut | 15 |
Nozzle Insulator* |
7 |
Compression Sleeve | 16 |
Nozzle Support Washer |
8 |
U/C Valve | 17 |
Liner Tube* |
9 |
-120 O-ring (2)* | *Included in Sky Ripper Systems
54mm reload kit. |
|
Features that we believe make Sky Ripper Systems 54mm motors a smart choice to add to your hybrid motor collection:
- Case constructed of ultra tough .095" wall 6061 aluminum tubing.
- Easy and reliable pyrotechnic ignition sequence. Helps keep the ground support requirements to a minimum.
- Snap ring based cases are easy to clean and maintain. No threads to get damaged by dirt, sand or rough handling.
- Double o-rings on internal components ensure a reliable leak-free performance.
- Universal internal components that work across the motor line. No need to remember what injector, fill line or nozzle goes to what motor case. Just change the motor cases to change total impulse.
- One reload kit for all six motors impulses. Never be out of a reload for your favorite motor impulse.
- Reload kits that include preheater grains. Concentrate on flying, not on finding or making ignition supplies.
- Thrust ring is compatible with the complete line of Slimline and Aeropak motor retainers and motor retainer adapters.
- Threaded vent tube port that exits the motor at 90 degrees to the rocket body, not parallel to it.
- 1/4-20 threaded recovery attachment point integrated into the forward bulkhead. Focus recovery forces on the strongest part of your rocket.
- Injection molded fuel grain that is molded from recycled
ABS.
- Interchangeable injector orifice diameters offer both high and medium average impulses for each case.
More Sky Ripper Systems 54mm motor information:
Manuals and Certification Paperwork